Samsung SPH-A503ZKASKE - Manual (Page 86)

86
•
calender
•
To-do
•
Notepad
3. Use the Up and Down navigation keys to highlight a function you want to lock.
4. Press the Check (right) soft key ( ). A check mark appears next to the highlighted
function.
5. Repeat steps 3 and 4 for all functions you want to lock, then press the key to lock
the selected functions.
Set Password
The default lock code for your device is generally the last four digits of your phone number.
It is advisable to change the default lock code to a secret code for security purposes.
1. In standby mode, press the MENU (left) soft key ( ), then press (for
CUSTOMIZE), and (for Settings), (for Security), and for Set
Password. You’re prompted to enter the Password (lock code).
Note: The default password is ‘0000’.
2. Enter the current password. You’re prompted to enter the New Password.
3. Enter the new password. You’re prompted to re-enter the new password for
verification.
4. Enter the new password again. Your changes are stored.
Note: Your device does not allow you to view the password for obvious security reasons. If you change the password, be
sure to write down or memorize the new password.
Bluetooth
Bluetooth is a short-range wireless communications technology capable of exchanging
information over a distance of about 30 feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If
the devices are within a range of one another, you can exchange information between
them, even if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the ability to view and change
the device name, show the visibility, and set the security for the device.
?@ .