Samsung EV-NX100ZBABUS - Manual (Page 70)

69
Shooting Functions
In order to take a realistic photo of a subject, the amount of light should
be constant. When the light source varies, you can use an optional
flash and supply a constant amount of light. Select appropriate settings
according to a light source and a subject.
To set flash
options, In Shooting mode, press [ m] ► 2 ►
Flash
►
an option.
Flash options
Option Description
Off: Do not use the flash.
Smart Flash: The camera automatically adjusts the brightness
of the flash according to the amount of light in the surrounding
environment.
Auto: The flash automatically fires in dark places.
Auto + Red: The flash automatically fires and prevents red-eyes.
Fill in: The flash fires whenever you take a photo.
Fill-in Red: The flash fires whenever you take a photo and
prevents red-eyes.
Flash
Option Description
1st Curtain: The flash fires
immediately after the shutter
opens. The camera captures a
photo of a subject earlier in an
action sequence clearly.
Ball moving direction
2nd Curtain: The flash fires just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
Ball moving direction
•
The options may differ depending on the shooting mode.
•
There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
•
You can use the flash and adjust the amount of light only when you use the
NX exclusive external flash.
Use only Samsung-approved flashes. Using incompatible flashes may
damage your camera.