Samsung SCH-R970ZKAUSC - Manual (Page 132)

126
– Keep Wi-Fi on during sleep: Specify when to
switch from Wi-Fi to mobile data for data
communications, when the phone goes to sleep
(when the backlight goes out). This setting can affect
your data usage, and the behavior of devices you
connect to your phone, such as when tethering or
using portable Hotspot.
– Always allow scanning: Allows the Google location
service and other apps to scan for networks, even
when Wi-Fi is turned off.
– Install certificates: Allows you to install security
certificates that you have on a MicroSD card.
– MAC address: (Not configurable) View your phone’s
MAC address, needed for connecting to some
secured networks (only displays when Wi-Fi is
active).
– IP address: (Not configurable) View your phone’s IP
address (only displays when connected to a Wi-Fi
network).
• WPS push button: Record/send the signal from the
Wi-Fi Protected Set-up push button on your Wi-Fi
router.
• WPS PIN entry: Record/send the Wi-Fi Protected Set-
up Personal Identification Number for your Wi-Fi router.
• Help: Provides on-line assistance to perform Wi-Fi
interface tasks.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
via Wi-Fi, without a Wi-Fi network or hotspot, and without
having to set up the connection. For example, some printers
support Wi-Fi Direct, and you could print from your phone via
Wi-Fi Direct.
Establishing Wi-Fi Direct connections
1. From the Home screen, touch Menu ➔
Settings ➔ ➔ Wi-Fi ➔ Wi-Fi Direct.
2. Touch Wi-Fi Direct. The Wi-Fi Direct screen displays,
and your phone scans for available Wi-Fi Direct devices
and lists them under Available devices.
3. To connect to a single Wi-Fi Direct device, touch its
name in the list.
4. To connect to multiple Wi-Fi Direct devices, touch
Multi-connect, next touch Select all or individual
devices, then touch Done.
Connections Connections