Samsung SCH-R530MBBUSC - Manual (Page 145)

Connections 139
– Keep Wi-Fi on during sleep: Specify when to switch from
Wi-Fi to mobile data for data communications, when your phone
goes to sleep (when the backlight goes out). This setting can
affect your data usage, and the behavior of devices you connect
to your phone, such as when tethering or using portable
Hotspot.
– Always allow scanning: When enabled, Google location
service and other apps scan for Wi-Fi networks, even when
Wi-Fi is turned OFF.
– Install certificates: Installs optional security certificates from
an installed microSD card. For more information, refer to
"Installing a Memory Card” on page 11.
– MAC address: (Not configurable) View your phone’s MAC
address, needed for connecting to some secured networks (only
displays when Wi-Fi is active).
– IP address: (Not configurable) View your phone’s IP address
(only displays when connected to a Wi-Fi network).
• WPS push button: Record/send the signal from the Wi-Fi
Protected Set-up push button on your Wi-Fi router.
• WPS PIN entry: Record/send the Wi-Fi Protected Set-up
Personal Identification Number for your Wi-Fi router.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
through Wi-Fi, without a Wi-Fi network or hotspot, and
without having to set up the connection. For example, some
printers support Wi-Fi Direct, and you can print from your
phone using Wi-Fi Direct.
Turning Wi-Fi Direct On or Off
1. From a Home screen, touch Menu ➔ Settings ➔
Connections ➔ Wi-Fi.
2. Touch the OFF/ON button to turn Wi-Fi ON .
Wi-Fi must be on to use Wi-Fi Direct.
3. Touch Wi-Fi Direct.
The Wi-Fi Direct screen displays, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices.