Samsung SC-X205L-XAA - Manual (Page 139)

ENGLISH
135 135
Troubleshooting
Self Diagnosis Display
Not enough free space for saving files .
The file is corrupted.
Paper has run out.
Ink is low.
The file is wrong.
An error has occurred while transferring data.
Power saving mode works.
Battery is low.
The HOLD switch is locked.
The Memory Card is corrupted.
Format the Memory Card.
Failed to write.
Failed to read.
The format is not supported.
Memory Card is protected to write.
The video file is corrupted.
Not enough free space
Corrupted file
Paper error
Ink error
File Error
Communication Error
Sleeping now...
Low battery
Holding the key
Card error
Not formatted
Write error
Read error
Not supported format
Write protected
MPEG decoding Error
Check the space of internal memory or the external memory.
Delete the corrupted file.
Check the paper in the printer. If there is no paper, insert the paper.
Check if the ink or toner is low.
Check that the file is JPEG.
Disconnect the USB cable and connect it again.
Press any button to return to previous menu.
Charge the Battery Pack or connect the AC Power Adapter.
Unlock the HOLD switch and operate the Sports Camcorder.
Format the Memory Card or replace it with a new one.
Format the Memory Card.
Check the memory space or format the memory.
Delete the file.
The AVI or JPEG file that is not supported. Check the supported file.
on page 30.
Unlock the Memory Card. (except MMC)
Delete the corrupted file.
Informs that… Action Display
✤ If these instructions do not solve your problem, contact your nearest Samsung dealer or authorized service center/personnel.
Symptom Possible Causes Measure
The power is not connected properly
The battery is dead
The battery is too cold
The Date/Time is not set
Focus is set to manual mode
Recording is being done in a dark place
Lens is covered with condensation
The Memory Card is in wrong position
A foreign object is in the Memory Card slot Connect the AC Power Adapter properly, page 25
Replace the dead Battery Pack
Warm up the battery or move to warmer place
Set the Date&Time, page 104
Set focus to AUTO
Use the flash or light the location
Clear the lens and check the focus
Insert the Memory Card properly, page 34
Clear the Memory Card slot No power is supplied
Date/Time is wrong
Focus does not adjust automatically
The Memory Card will not load
properly