Samsung SGH-I997ZKAATT - Manual (Page 119)

Changing Your Settings 114
Device administrators allows the phone to enhance its security.
The following options may be available depending on the type of
account:
• Password enabled: requires that devices ask for PIN or passwords.
• Minimum password length: sets the required number of characters
for the password. For example, you can require PIN or passwords to
have at least six characters.
• Alphanumeric password required: requires that passwords have a
combination of letters and numbers. They may include symbolic
characters.
• Maximum failed password attempts: specifies how many times a
user can enter the wrong password before the device wipes its data.
The Device Administration API also allows administrators to remotely
reset the device to factory defaults. This secures data in case the
device is lost or stolen.
• Maximum inactivity time lock: sets the length of time since the user
last touched the screen or pressed a button before the device locks the
screen. When this happens, users need to enter their PIN or passwords
again before they can use their devices and access data. The value
can be between 1 and 60 minutes.
Other features include:
• Prompt user to set a new password.
• Lock device immediately.
• Wipe the device's data (restores the device to factory defaults).
Credential storage
This option allows certain applications to access secure
certificates and other credentials. Certificates and credentials
can be installed to the SD card and password protected.
1. From the Home screen, tap ➔ Settings ➔ Location
and security.
2. Tap Use secure credentials to activate this feature. A check
mark displayed next to the feature indicates secure
credentials is active.
3. Tap Install encrypted certificates to install encrypted
certificates from the memory (SD) card.
4. Tap Set password to set or change the credential storage
password.
5. Tap Clear storage to clear the storage (SD card or phone
memory) of all contents and reset the credentials
password.
Applications
This device can be used for Android development. You can write
applications in the SDK and install them on this device, then run
the applications using the hardware, system, and network. This
feature allows you to configure the device for development.