Using your tv remote for media playback – Samsung SGH-I997ZKAATT User Manual
Page 145
Connections 140
Note: If your TV has multiple HDMI ports, you may use any of the ports but
need to make sure your TV settings have the correct HDMI port
selected. Consult your TV owner’s manual.
The TV screen will instantly display what is on your device home
screen.
Note: After connecting the MHL Adapter, the upper and lower sides of the
TV/Monitor’s screen may be cut off. In this case, you can adjust the TV/
Monitor in the Settings menu on your TV. Consult your TV owner’s
manual.
Using your TV Remote for Media Playback
Your device comes with RCP (Remote Control Protocol). With RCP,
you can:
•
Use the navigation keys on your TV remote to browse through your
phone User Interface.
•
Access Video conferencing, Gaming, Internet, etc.
•
Use the TV remote media keys to control phone video while the phone
is connected to your TV.
To connect to RCP, follow these steps:
1.
Connect your phone to the HDMI Port 1 on your TV if
possible. For more information, refer to “Media Playback
2.
Set the following settings on your TV:
Note: Menu setting headings may differ depending on the brand of your TV.
Go to Menu/Tools
➔
Settings/Input
➔
Anynet+ (HDMI-CEC)
➔
MHL Device (Setup) and set Anynet+ (HDMI-CEC) to ON.
Go to Menu/Tools
➔
Settings/Input
➔
Anynet+ (HDMI-CEC)
➔
MHL Device (Setup)
➔
Searching Connections.
After searching is complete, Anynet+ settings complete will
be displayed.
3.
Press OK.
You are ready to use your TV remote to control your phone
User Interface.
Note:
When using your TV remote control with this application, there is a
possibility that the remote may not work correctly if the TV is not made
by SAMSUNG.