Samsung SPH-M800PRBSPR - Manual (Page 57)

54 Using Your Device: Speech to Action
Making a Call
Calling Contacts Entries
1. Press on the side of your device. You will hear a prompt.
2. Say “ Call ” followed by the name and the label for the phone number you wish to call. For
example, say “ Call John Mobile .” The device dials the phone number stored for the contact
“ John ” with the label “ Mobile .”
Ⅲ If the location is not recognized or the name does not have a phone number stored in
Contacts, your device will play the message “
No match found, ” and then return you to the
previous screen.
Ⅲ If a name has only a single number, or if you know the name but are not sure which
number to call, say “
Call ” followed by the name only. If the name is recognized and
there is only one number for the name, your device immediately places the call.
Ⅲ If there are multiple numbers stored for the contact, the device prompts you with “ Which
Number? ” and displays a list of options. You can select an option by saying it or by
touching the corresponding phone number onscreen.
Calling Phone Numbers (Digit Dialing)
1. Press on the side of your device. You will hear a prompt.
2. Say “ Call ” followed immediately by a 10-digit phone number, for example, say “ Call 555
555 5555 .”
Note If the device does not hear a command within approximately eight seconds, it deactivates
Speech to Action without taking any action.
Nerva.book Page 54 Thursday, July 24, 2008 2:26 PM