Samsung LN52A610A3RXZP - Manual (Page 56)

English - 4
listening through a receiver (home theater)
You can listen to sound through a receiver instead of the TV speaker.
. Press the toolS button. Then press the EntEr button to select “Anynet+(HDMI-
CEC)”. Press the ▲ or ▼ button to select "Receiver", then press the EntEr button.
. Press the ◄ or ► button to select to "On", then press the EntEr button.
Now you can listen to sound through the receiver.
. Press the ExIt button to exit.
If your receiver supports audio only, it may not appear in the device list.
When using the WISELINK feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the PIP and audio-
related(MTS, Preferred language) menus.
If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power
failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. (refer to page 29)
recording
you can make a recording of a tV program using a recorder.
Press the
rEC button.
Recording begins. (Only when the Anynet + enabled recording device is connected.)
You can record the source streams by selecting "Record" after pressing the toolS button.
Pressing the rEC button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording devices users manual.
View tV
Select Device 
record 
menu on Device 
Device operation 
receiver :off 
Setup 
tV air 
move Enter
return
BN68-01429F-00Eng-0416.indd 54 2008-04-16 ¿ААь 10:17:58