Remove all equipment from the packing box and s, Insert the female end of the power cord into th, Insert the male end of the power cord into an e – Allied Telesis AT-MR908TX User Manual

Page 31: Check the front panel of the hub to make sure t, Plug all 100base-tx cables into the 100base-tx, Figure6: standalone at-mr908tx back panel, Ensure that the mdi /mdi-x slide switch is set, Plug the opposite end of each 100base-tx cable

Advertising
Remove all equipment from the packing box and s, Insert the female end of the power cord into th, Insert the male end of the power cord into an e | Check the front panel of the hub to make sure t, Plug all 100base-tx cables into the 100base-tx, Figure6: standalone at-mr908tx back panel, Ensure that the mdi /mdi-x slide switch is set, Plug the opposite end of each 100base-tx cable | Allied Telesis AT-MR908TX User Manual | Page 31 / 62 Remove all equipment from the packing box and s, Insert the female end of the power cord into th, Insert the male end of the power cord into an e | Check the front panel of the hub to make sure t, Plug all 100base-tx cables into the 100base-tx, Figure6: standalone at-mr908tx back panel, Ensure that the mdi /mdi-x slide switch is set, Plug the opposite end of each 100base-tx cable | Allied Telesis AT-MR908TX User Manual | Page 31 / 62
Advertising
See also other documents in the category Allied Telesis Computer hardware: