Karcher IVL 120-27-1 - Manual (Page 9)

– 3
Note: When operating any key on the front
side, the backlight of the LCD display is ac-
tivated for a period of 30 seconds.
Note: With the keys on the front side of the
PLC control the parameters can be config-
ured and programmed.
Start menu
–
total:
Operating hour counter
– actual:
Shift counter (resettable)
– Shift button
If the shift button is pushed, it enables
the indication of a context-sensitive
menu above the Z-buttons (Ins., Del.;
Param, etc.).
– Button Menu/Ok
This button is used for any kind of con-
firmation: Menu, submenu, programme,
parameter, etc.
– Navigation keys
◄/▼/▲/► (Z1-Z4)
B029 With pushbutton operation of the
remote control: Operating time of
the vacuum cleaner on station 3
(specification in seconds)
B030 With pushbutton operation of the
remote control: Operating time of
the vacuum cleaner on station 4
(specification in seconds)
B033 Maximum operating time of the
vacuum cleaner (specification in
seconds)
B049 Operating mode of the remote
control 1: 0=pushbutton,
1=switch
B050 Operating mode of the remote
control 2: 0=pushbutton,
1=switch
B051 Operating mode of the remote
control 3: 0=pushbutton,
1=switch
B052 Operating mode of the remote
control 4: 0=pushbutton,
1=switch
B065 Reset of the shift counter
B129 Station 1: 0=valve, 1=indicator
lamp
B131 Station 2: 0=valve, 1=indicator
lamp
B133 Station 3: 0=valve, 1=indicator
lamp
B135 Station 4: 0=valve, 1=indicator
lamp
B137 0=no soft start installed, 1=soft
start installed
B143 Stopping time of the vacuum
cleaner (specification in seconds)
Menu of the PLC control
LCD display
Shift Z1 Z2 Z4 Z3
Menu/Ok
9 EN