Safety precautions for power supply unit, Appendix d: hardware specifications – Audiovox Pocket PC Phone User Manual

Page 110

Advertising
background image

Avoid hot areas: The product should be placed away from heat sources such as radiators, heat registers, stoves,

or other products (including amplifiers) that produce heat.
Avoid wet areas:
Never use the product in a wet location.
Avoid pushing objects into product: Never push objects of any kind into cabinet slots or other openings in the

product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.
Mounting Accessories:
Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting

of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended

by the manufacturer.
Avoid unstable mounting: Do not place the product with an unstable base

.

Use product with approved equipment: This product should be used only with personal computers and options

identified as suitable for use with your equipment.
Adjust the volume:
Turn down the volume before using headphones or other audio devices.
Cleaning: Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning, but NEVER use water to clean an LCD screen.

Safety Precautions for Power Supply Unit

Use the correct external power source: A product should be operated only from the type of power source

indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your

authorized service provider or local power company. For a product that operates from battery power or other

sources, refer to the operating instructions that are included with the product. Handle battery packs carefully:

This product contains a Lithium Polymer battery. There is a risk of fire and burns if the battery pack is handled

improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external

contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60

°C (140°F).

DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH SPECIFIED BATTERIES. DISPOSE OF USED

BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR

REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.

Appendix D: Hardware Specifications

Feature Component
PDA module: Processor

Memory

Intel Cotulla Processor 400MHz CPU
SDRAM 32MB; Flash ROM: 32MB

Radio

CDMA EVDO backwards compatible to 1xRTT

LCD module

3.5” 240x320 pixels, 65K colors transflective TFT.

Buttons

Four buttons (2 CDMA and 2 Windows CE AP buttons -
programmable); power and back light control; navigation pad for
scroll up, down, left, right and action; volume adjustment button.

Stylus

101 mm, maximum diameter 4.5 mm

Notification

One LED or Vibration motor for CDMA, and PDA for event/standby
alarm, charging.

Audio

Built in Microphone and speaker; one earphone/ microphone jack
with stereo sound; MP3 stereo

Interface Feature

connector

(RS-232, USB and DC power); infrared IrDA SIR.

Power

Rechargeable battery Li-Polymer; 3.7V 1500 mAh; built in charger.

Accessories

AC adapter (input: 100-240Vac, 50-60Hz, 0.2A; output: 5VDC, 1A
Max, 5W)
USB cradle; earphone plug; service kit; protective pouch.

110

Advertising