Audiovox Pocket PC Phone - Manual (Page 64)

Connect Directly to an E-mail Server
You can set up a connection to an e-mail server so that you can send and receive e-mail messages by using a modem
or network connection and Inbox on your device.
The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP
gateway.
You can use multiple e-mail services to receive your messages. For each e-mail service you intend to use, first set up
and name the e-mail service. If you use the same service to connect to different mailboxes, set up and name each
mailbox connection.
Setting up an e-mail service:
1. In Inbox on
your device,
tap
Accounts,
and then
New
Account.
2. Fill you e-mail
address in the field,
then tap Next.
Tapping Next will initiate auto-configuration – which attempts to connect your Pocket PC Phone to your
e-mail server and automatically download the necessary e-mail connection settings.
If auto-configuration is successful you can begin sending/receiving e-mails straight away.
If unsuccessful you will need to enter the settings manually (see screens 4/5 & 5/5).
64