Before startup, Attaching the accessories, Water supply – Karcher K 2 Premium User Manual

Page 16

Advertising
background image

– 7

6 Detergent suction hose with detergent

filter and lid

7 Detergent Tank
8 Coupling element for water connection
9 Storage for spray lance
10 Storage for trigger gun
11 Mains cable with mains plug
12 Bearing wheel
13 Trigger gun
14 Lock trigger gun
15 Clamp for high pressure hose
16 High pressure hose

———————————————––––

Optional accessories

17 Spray lance with pressure regulation

(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the hand spray gun
and turn the spray lance to the desired
position.

18 Spray lance with Dirtblaster

For strong contaminations

19 Washing brush

Suitable for use with detergents.

20 Rotary washing brush

Suitable for use with detergents.
Especially suitable for cleaning cars.

21 Foam nozzle with detergent container

With powerful foam for effortless clean-
ing.
———————————————––––

Not included in the delivery

22 Water supply hose

Use a fabric reinforced water hose with
a commercially available coupling. Min-
imum diameter 13 mm (1/2 inch); mini-
mum length 7.5 m.

Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 3
Illustration

Insert the transport wheels and lock
them.

Illustration

Attach the transport handle.

Illustration

Pull the suction hose for detergent
through the cover of the detergent tank
until the filter contacts the bottom of the
tank.

Close the detergent tank with the lid.

Lock the detergent tank in place on the
appliance.

Illustration

Screw the coupling element to the wa-
ter connection on the appliance.

Illustration

Pull out the clamp for the high-pressure
hose from the hand spray gun (e.g. a
Philips screwdriver).

Illustration

Connect high pressure hose to trigger
gun.

Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.

For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.

Warning

According to applicable regulations, the ap-
pliance must never be used on the drinking
water net without a system separator. A
suitable system separator by KÄRCHER or
alternatively a system separator according
to EN 12729 type BA must be used.
Water that has flown through a system sep-
arator is no longer classified as drinking
water.

Before Startup

Attaching the Accessories

Water supply

16

EN

Advertising
This manual is related to the following products: