Sony DCR-SR220D - Manual (Page 13)

Recording/Playback
1
US
Recording/Playback
Recording
The images are recorded on the media selected on the media setting (p. 11).
In the default setting, both movies and still images are recorded on the hard disk.
1
Turn the POWER switch until the respective lamp lights up.
Press the green button only when the POWER switch is in the OFF (CHG) position.
2
Start recording.
Movies
Press START/STOP  (or ).
To stop recording, press START/STOP
again.
Still Images
Press PHOTO  lightly to adjust the
focus  (a beep sounds), then press it
fully  (a shutter click sounds).
appears beside or . When
disappears, the image has been recorded.
Tips

You can check the recordable time and the
remaining capacity, etc., by touching
(HOME)  (MANAGE MEDIA) 
[MEDIA INFO].

You can capture still images by pressing
PHOTO  during movie recording.

The maximum continuous recordable time is
 approximately 13 hours.

When a movie file exceeds 2 GB, the next movie
file is created automatically.
POWER switch
: To record movies
: To record still images
START/STOP 
START/STOP 
[STBY]  [REC]
PHOTO 
Flashing  Lights up
(HOME)
(p. 20)