Sony Bluetooth Utility - Manual (Page 723)

Using a wireless modem station
Important
 Please refer to " What you need to know about using Bluetooth TM wireless technology " for an understanding of the basic concepts to keep
in mind.
Modem station cannot be detected
 If the modem station is connected to and is being used by another device, the modem station will be undetectable even if you search for it.
Cannot connect to modem station
 If the modem station is connected to and is being used by another device, no other device will be able to connect to the modem station.
Bluetooth passkey entry failed
 The Bluetooth passkey (PIN code) comprises a sequence of alphanumeric characters, with the letters able to be rendered in upper and
lower case.
If [Caps Lock] is on, the Bluetooth passkey may not be able to be entered correctly.
Cannot connect to telephone line
 Please ensure that the telephone cable is connected from the socket to the "LINE" terminal on the modem station.
Note
o If the telephone cable has come loose because it has not been fully inserted into the socket, the resulting poor contact may prevent
data from being transmitted accurately.
o Communication will be impossible if the interior of the cable has been broken. Please replace the cable with another one.
 Please ensure that the two slide switches on the underside of the main unit have been set to the "NORMAL" and "MODEM" positions
respectively.
Cannot connect to the Internet
 The telephone number of the connection (i.e., the telephone number for the access point of your Internet service provider) may not be
correct. Please check the telephone number.
 The user ID and/or password for the provider with whom you have signed up may have been entered incorrectly. Please check the user ID
and password.
 The default connection may have been configured with different settings. Please set the connection configured for mobile telephone use
as the
default connection .
 When you place a call using a company switchboard or other exchange, the system may require you to enter a "0" before the telephone
number itself. Please check the type of telephone line you are using.
Cannot send or receive faxes
 Once you have registered a wireless modem station as your fax server, you will need to enter the fax settings from the [Printer and Faxes]
window in the Control Panel.
Please refer to "
Using a modem station for fax transmissions " for information on the configuration procedure.
 The telephone number of the fax destination may have been entered incorrectly. Please check the telephone number.
Page 723