Sony HDR-XR200V - Manual (Page 112)

11
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
Dubbing/Connecting to other
devices
Images are not dubbed correctly.
You cannot dub images using the HDMI cable.
The A/V connecting cable is not connected
properly. Make sure to connect the cable to the
input jack of another device (p. 66).
GPS
The camcorder is not receiving a GPS
signal (HDR-XR200V).
Your camcorder may not be able to receive
radio signals from GPS satellites because of
obstructions. Bring your camcorder to an
open area, and set the GPS switch to ON
again.
The current location on the map of the
camcorder is different from the actual
current location (HDR-XR200V).
The margin of error of the radio signal from
GPS satellites is large. The margin of error can
be as wide as several-hundred meters at the
maximum.
Functions that cannot be used
simultaneously
The following list shows examples of
unworkable combinations of functions and
menu items.




Cannot use Because of following settings
[FACE
DETECTION]
[SMTH SLW REC],
[DIGITAL ZOOM],
[SPOT MTR/FCS], [SPOT
METER], [SPOT FOCUS],
[EXPOSURE], [FOCUS],
[TWILIGHT], [TWILIGHT
PORT.] (HDR-XR200/
XR200V), [CANDLE],
[SUNRISE&SUNSET],
[FIREWORKS],
[LANDSCAPE],
[SPOTLIGHT], [BEACH],
[SNOW], [WHITE BAL.],
[DETECTION
SET]
[SMTH SLW REC],
[DIGITAL ZOOM],
[FADER], [SELF-TIMER]
[SMILE
SENSITIVITY]
[SMTH SLW REC],
[DIGITAL ZOOM],
[FADER], [SELF-TIMER]
[SMILE
PRIORITY]
[SMTH SLW REC],
[DIGITAL ZOOM],
[FADER], [SELF-TIMER]
[FRAME
SETTING]
[SMTH SLW REC]
[SCENE
SELECTION]
[FADER], [TELE MACRO]
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility.