Adjusting the focus manually, Adjusting, The focus manually” (p. 41) f – Sony DCR-HC85 User Manual

Page 41

Advertising
background image

Recor

d

ing

Recording

41

To adjust the focus automatically

Follow steps 1 and 2, then touch [AUTO] in step
3. Or press FOCUS after step 4.

b

Note

• You cannot use the SPOT FOCUS function together

with [PROGRAM AE].

• Focusing distance information will not be displayed.

Adjusting the focus manually

You can adjust the focus manually according
to the recording conditions.
Use this function in the following cases.

– To record a subject behind a window covered

with raindrops.

– To record horizontal stripes.
– To record a subject with little contrast

between the subject and its background.

– When you want to focus on a subject in the

background.

– To record a stationary subject using a tripod.

1

Press FOCUS during recording or in
the standby mode.

9

appears.

2

Rotate the focus ring and adjust the
focus.

9

changes to

when the focus cannot be

adjusted any further.

9

changes to

when the focus cannot be adjusted any
closer.

Tips for focusing manually

• It is easier to focus on the subject when you use the

zoom function. Move the power zoom lever towards
T (telephoto) to adjust the focus, and then, towards
W (wide angle) to adjust the zoom for recording.

• When you want to record a close-up image of a

subject, move the power zoom lever towards W
(wide angle) to fully magnify the image, then adjust
the focus.

To use the expanded focus

For DCR-HC85:
It will be easier to confirm the focus setting by
enlarging the image during manual focusing.
When the CAMERA-MEMORY lamp is on, set
[EXP.FOCUS] in the

(CAMERA SET)

menu to [ON] (p. 66).
When you rotate the focus ring,

appears

and the image will be displayed at twice its
original size.

To adjust the focus automatically

Press FOCUS again.

z

Tip

The focal distance information (for when it is
dark and hard to adjust focus) appears for 3
seconds in the following cases. (It will not be
displayed correctly if you are using a
conversion lens (optional).)

– When the focus mode is switched from automatic

to manual.

– When you rotate the focus ring.

FOCUS

Focus ring

Advertising
This manual is related to the following products: