Sony RM-VL700S - Manual (Page 14)

14
Notes on operating your
components
About the input select of a TV
Each time TV/VIDEO is pressed,
the input is changed in order. It is
also possible to select directly by
pressing one of following Number
buttons while holding TV/VIDEO
pressed when more than two
VCRs are connecting.
“TV/VIDEO” + “0” : TV tuner
“TV/VIDEO” + “1” : VIDEO1
“TV/VIDEO” + “2” : VIDEO2
“TV/VIDEO” + “3” : VIDEO3
“TV/VIDEO” + “4” : VIDEO4
“TV/VIDEO” + “5” : VIDEO5
“TV/VIDEO” + “6” : VIDEO6
If the above operations do not
work, program the remote control
signals of your component in to
the Commander using the
Learning function (page 15).
About the input select of a VCR
(only for Sony VCR)
Each time TV/VIDEO is pressed,
the input is changed in order. It is
also possible to select directly by
pressing one of following Number
buttons while holding TV/VIDEO
pressed.
“TV/VIDEO” + “0” : Tuner
“TV/VIDEO” + “1” : LINE1
“TV/VIDEO” + “2” : LINE2
“TV/VIDEO” + “3” : LINE3
“TV/VIDEO” + “4” : LINE4
“TV/VIDEO” + “5” : DV in
When you use a Sony VCR, the
above commands are preset. For
other brands, it is possible to
“teach” the above sequential
button operations using the
Learning function (see page 15).
Operating Your Components
with the Remote Commander
(continued)