Sony HDR-XR160 - Manual (Page 6)

6
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
US
Notes on use
Do not do any of the following. Otherwise, the
recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
ejecting the memory card when the access
lamp (p. 23) is lit or flashing
removing the battery pack or AC Adaptor
from the camcorder, or applying mechanical
shock or vibration to the camcorder when the
(Movie)/ (Photo) lamps (p. 25) or the
access lamp (p. 23) are lit or flashing
When using a shoulder belt (sold separately), do
not crash the camcorder against an object.
Do not use your camcorder in very loud areas
(HDR-PJ50/PJ50V/XR160).
On the drop sensor (HDR-PJ50/PJ50V/
XR160)
To protect the internal hard disk from shock
by dropping, the camcorder has a drop sensor
function (p. 96). When a drop occurs, or
under a non-gravity condition, the block noise
made when this function is activated by the
camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/
playback may be stopped.
Note on using the camcorder at high
altitudes (HDR-PJ50/PJ50V/XR160)
Do not turn on the camcorder in a low-
pressure area, where the altitude is more than
5,000 meters (16,000 feet). Doing so may
damage the internal hard disk drive of your
camcorder.






