Sony PEG-SJ30 - Manual (Page 69)

69
Memory Stick Import/Export
Chapter 7
Installing
You do not need to install the Memory Stick Import
application on your CLIÉ handheld
The Memory Stick Import application is pre-installed at the factory.
This section describes how to install the Memory Stick Export
software.
Installing the Memory Stick Export software on your
computer
Install the Memory Stick Export software on your computer using the
supplied Installation CD-ROM.
1
Insert the installation CD-ROM into the CD-ROM drive of
your computer.
The setup program starts automatically.
2
Select the model of your CLIÉ handheld (PEG-SL10, PEG-
SJ20, or PEG-SJ30).
3
Click Install CLIÉ Utilities.
4
Click Install Memory Stick Export.
The installation starts.
Follow the instructions displayed on the screen.
After the installation is completed, the installation screen reappears.
5
Click Finish.
The installation of Memory Stick Export software ends.