Sony NW-E003F - Manual (Page 8)

NW-E002F/E003F/E005F/E002/E003/E005.GB.2-695-812-11(1)
14
NW-E002F/E003F/E005F/E002/E003/E005.GB.2-695-812-11(1)
15
2
Connect the USB connector of the player to your computer.
3
Place the pointer over [Transfer] and select [ATRAC Audio Device]
from the transfer destination list.
4
Select an audio file(s) or album you want to transfer.
5
Click to start transferring.
To stop transferring, click .
Notes
• Do not disconnect the player from your computer while data is being transferred.
• Do not leave the player connected for extended periods to a laptop computer that is not
connected to AC power, because the player may discharge the computer’s battery.
 Hints
• You can create and transfer playlists that group your favorite songs into a list. For details, refer
to SonicStage Help.
• Replace the USB cap after disconnecting the player from your computer.
• To delete songs of the player, use the SonicStage software on your computer.
Transferring Music
Connect the player to your computer and transfer the audio data to the player.
The player’s battery is recharged while connected to a computer.
When the remaining battery indication of the display shows , charging is
complete.
When you use the player for the first time, or if you have not used the player for a long
time, recharge it fully, and then transfer the data to the player.
For information on recharging time, see the Operation Guide (PDF).
1
Double-click the icon on the desktop.
SonicStage starts up.