Sony DCR-TRV33 - Manual (Page 104)

104
The label can consist of up to 10 characters and is stored in Cassette Memory. When you
insert the labeled cassette and set the POWER switch to CAMERA or VCR, the label is
displayed for about 5 seconds.
The POWER switch should be set to or .
Operate by touching the panel.
(1) Insert the cassette with Cassette Memory you want to label.
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select TAPE TITLE in
, then press EXEC (p. 181).
(5) Select a desired character. Repeat pressing a key to select a desired character
on the key.
(6) Press c to move the cursor to select the next character. Repeat the same
procedure as steps 5 and 6 to complete the label.
(7) Press SET. The label is stored in memory.
To return to FN
Press EXIT.
To erase the label you have made
Erase the label by selecting C in step 5, then press SET.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you have superimposed titles in the cassette
When the label appears, up to 4 titles also appear.
To erase the character
Press
C. The last character is erased.
To enter a space
Press
c.
Labeling a cassette on a cassette with
Cassette Memory
4 5 6
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/ –
WXY
Z
TUV PQR
S
[ G_ _ _ _ _ _ _ _ _ ]
EXIT TAPE TITLE
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/ –
WXY
Z
TUV PQR
S
[ GRADU_ _ _ _ _ ]
EXIT TAPE TITLE
&? ! ABC DEF T t
678
90
123
45
MNO JKL GH I
SET ’ . ,
/ –
WXY
Z
TUV PQR
S
[ _ _ _ _ _ _ _ _ _ _ ]
EXIT TAPE TITLE