Sony PRS-900BC - Manual (Page 160)

160
Troubleshooting
Troubleshooting
If the Reader does not function as expected, try the
following steps to resolve the issue.

Reset the Reader by pressing the RESET button
with the tip of the supplied stylus, or a small pin
or clip, then slide the POWER switch to turn on
the Reader.
Removing the tip from the supplied stylus
Twist the tip until it is detached from the supplied
stylus. To push the RESET button, use the other
end of the tip that is stored in the body. Be sure to
attach again after using it.
Use to push the RESET button
The content and settings stored on the Reader are
not affected by resetting, and no information is
erased.
Troubleshooting
Continued