Sony HDR-XR520V - Manual (Page 115)

11
Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
Cannot use Because of following settings
[FRAME
SETTING]
NightShot, [SMTH SLW
REC]
[SCENE
SELECTION]
NightShot, LOW LUX,
[FADER], [TELE MACRO]
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen or
viewfinder, check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility.
C: (or E:) : (Self-diagnosis display)
C:04: 
The battery pack is not an “InfoLITHIUM”
battery pack (H series). Use an
“InfoLITHIUM” battery pack (H series)
(p. 129).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 18).
C:13:  / C:32:
Remove the power source. Reconnect it and
operate your camcorder again.
E:20:  / E:31: / E:61: / E:62: /
E:91:  / E:94: / E:95: / E:96:
A malfunction that you cannot service has
occurred. Contact your Sony dealer or local
authorized Sony service facility. Inform them
of the 5-digit code, which starts from “E”.
101-0001 (Warning indicator pertaining
to files)
Slow flashing
The file is damaged.
The file is unreadable.






(Warning on the hard disk of the
camcorder)
Fast flashing
The hard disk of the camcorder is full.
An error may have occurred with the hard
disk drive in your camcorder.
 (Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions,  may flash, even if there
are about 20 minutes remaining.
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
for a while in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
(Low temperature warning)
Fast flashing
The temperature of your camcorder is
extremely low. Make the camcorder warm.
(Warning indicator pertaining to
“Memory Stick PRO Duo” media)
Slow flashing
Free spaces for recording images are running
out. For the type of “Memory Stick” media you
can use with your camcorder, see page 70.
No “Memory Stick PRO Duo” media are
inserted (p. 70).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 67, see Operating Guide too), delete
unnecessary images, or format the “Memory
Stick PRO Duo” media (p. 72).









