Sony PEG-T415 - Manual (Page 9)

9
Chapter 4
Assigning operations to the application buttons and Jog
Dial navigator
You can assign operations to the Jog Dial ™ navigator or to the application
buttons on the front panel. This is convenient for those operations you
perform most (e.g. adjusting the TV volume), since you do not even have to
take out the stylus to operate.
1
On the Application Launcher screen, rotate the Jog Dial ™
navigator to select CLIÉ RMC and then press the Jog Dial
navigator. Or, tap the CLIÉ RMC icon on the Application
Launcher screen.
CLIÉ Remote Commander starts and the control screen of the last used
device is displayed.
2
Tap Menu .
3
Tap Key Assignment from the Options menu.
The Key Assignment screen appears.
4
If the check box for Use Key Assignment at the bottom right
corner is not selected, tap to select it.
If the check box is unmarked, application buttons and Jog Dial navigator
cannot be used in the CLIÉ Remote Commander application even if
operations are assigned to them.
Continued on next page
Preparing the CLIÉ Remote Commander for your use