Other functions, Creating a dvd (direct access to “click to dvd”) – Sony DCR-PC350 User Manual

Page 30

Advertising
background image

Other functions

30

Other functions

Creating a DVD
(Direct Access to
“Click to DVD”)

b

Notes

• Some models are not compatible for this operation.

Regarding supported models, check to see if there is
a listing for the Burn DVD feature in the index of the
Camera Operations Guide.

• You can only use an i.LINK cable for this operation.

You cannot use a USB cable.

You can create DVDs when you connect your
camcorder to a Sony VAIO series computer*
that supports “Click to DVD” via an i.LINK
cable (optional). The picture is automatically
copied and written to a DVD.

The following procedures describe how to
create a DVD from a picture recorded on a tape.
For system and operation requirements, visit the
following URL:

* Note that you need a Sony VAIO computer

equipped with a DVD drive that can be used to
write DVDs. You also need the computer with
“Click to DVD Ver.1.2” (Sony original software) or
later installed.

– Europe

http://www.vaio-link.com/

– USA

http://www.ita.sel.sony.com/support/
dvimag/

– Asia Pacific Regional

http://www.css.ap.sony.com/

– Korea

http://scs.sony.co.kr/

– Taiwan

http://vaio-online.sony.com/tw/vaio/

– China

http://www.sonystyle.com.cn/vaio/

– Thailand

http://www.sony.co.th/vaio/index.html

– Latin America

http://vaio-online.sony.com/

Using the Direct Access to “Click to
DVD” function for the first time

The Direct Access to “Click to DVD” function
enables you to copy pictures recorded on a tape
to a DVD easily if your camcorder is connected
to a computer. Before operating the Direct
Access to “Click to DVD” function, follow the
steps below to start “Click to DVD Automatic
Mode Launcher.”

1

Turn on the computer.

2

Click the start menu, then select [All
Programs].

3

Select [Click to DVD] from the programs
displayed, then click [Click to DVD
Automatic Mode Launcher].
[Click to DVD Automatic Mode Launcher]
starts up.

z

Tips

• After you start up [Click to DVD Automatic Mode

Launcher] once, from then on it starts up
automatically when you turn on your computer.

• [Click to DVD Automatic Mode Launcher] is set up

for each Windows XP user.

1

Turn on the computer.

Quit all applications running with an
i.LINK.

2

Prepare the power source for your
camcorder, then slide the POWER
switch repeatedly to select the PLAY/
EDIT mode.

Use the supplied AC Adaptor as the power
source since it takes a few hours to create a

to i.LINK (IEEE1394)
connector

i.LINK cable
(optional)

to

DV

Interface

Advertising
This manual is related to the following products: