Sony DCR-SX44 - Manual (Page 18)

1
US
Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder turns on.
To turn on your camcorder when the LCD screen is open, press POWER.
2
Select the desired geographical area with / , then touch [NEXT].
To set the date and time again, touch (MENU)  [Show others]  [CLOCK/ LANG]
(under [GENERAL SET] category)  [CLOCK SET]. When an item is not on the screen, touch
/ until the item appears.
3
Set [DST SET] or [SUMMERTIME], date and time, then touch .
The clock starts.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.



Touch the button on
the LCD screen.
MODE lamp
POWER button