Operation – Sony NWZ-E384BLK User Manual
Page 127
Search
Top page > Troubleshooting > Possible Causes of Symptoms > Operation
Operation
There is no sound.
The volume level is set to zero.
Turn the volume up.
The headphone plug is not connected properly.
If the headphones are connected improperly, the sound from the headphones will be
impaired. Insert the headphone plug until it clicks into place
The headphone plug is dirty.
Clean the headphone plug with a soft dry cloth.
No songs or videos are stored on your Walkman.
Follow the instructions in the displayed message, and transfer songs or videos from the
computer.
After prescribing the remedies above, if the problem still persists, press the RESET button of
your Walkman
Data cannot be played.
The battery is consumed.
Charge the battery fully
If your Walkman does not react, even after charging the battery, press the RESET button
to reset the Walkman
.
No data is stored on your Walkman.
Follow the instructions in the message, and transfer data from the computer.
After transferring by drag-and-drop in Windows Explorer or Finder on Mac, data hierarchy
levels do not correspond to your Walkman.
Place the data in the correct place by drag-and-drop
Transferred files are not in a playable format.
For information on the playable formats, see
. Some files may not be played back,
depending on certain file specifications.
The playback limitation period of the song has expired due to subscription conditions, etc.
Songs with an expired playback limitation period cannot be played back. Update them
using the software used for transferring.
The data may be damaged.
Damaged data within a file may be recognized as a non-playable format. Delete the
damaged data, and then transfer the non-damaged data from your computer again.
Data cannot be deleted on your “WALKMAN.”
You cannot delete songs, videos or photos on your Walkman.
Delete them using the software you used to transfer the data, Windows Explorer, or Finder
on Mac.
121