Other – Sony NWZ-E384BLK User Manual
Page 138
Search
Top page > Troubleshooting > Possible Causes of Symptoms > Other
Other
There is no beep sound when your “WALKMAN” is operated.
[Beep Settings] is set to [Off].
Set [Beep Settings] to [On]
The beep does not sound when your Walkman is connected to the cradle (not supplied), or
another device.
Your “WALKMAN” gets warm.
Your Walkman may become warm when the battery is being charged and just after charging.
The Walkman also may get warm when a large amount of data is transferred. This behavior is
normal and not cause for a concern. Set the Walkman aside for a while to allow it to cool
down.
The date and time have been reset.
If you left your Walkman for a while with the battery used up, the date and time may be reset.
This is not a malfunction. Charge the battery until
appears on the screen, and set the
date and time again
Noise is generated when plugging or unplugging the headphones.
Take off the headphones when plugging or unplugging the headphones. If you plug or unplug
the headphones while playing a song, you may hear noise from the headphones. This is not a
malfunction.
The alarm does not function.
When setting the alarm, the setting was stopped halfway or your Walkman was turned off
without confirming the setting of the hour and minutes.
The alarm does not function while your Walkman is connected to a computer.
Disconnect the USB cable.
The remaining battery power is low or insufficient.
Charge the battery by connecting your Walkman to a running computer
The alarm does not go off.
The alarm will not sound in the following situations.
Connected to a computer.
The sleep timer does not work.
The sleep timer will be canceled in the following situations.
132