Sony VPL-AW15 - Manual (Page 20)

20
Tip
Set “Input-A Signal Sel.” in the Setup
menu to “Auto” or “Computer.” If the input signal does
not appear properly, set it to “Computer.” ( 1 page 47, 54)
If you set your computer, such as a notebook type, to output the signal to both computer’s display
and this equipment, the picture of the equipment may not appear properly. Set your computer to
output the signal to only the external monitor.
For details, refer to the computer’s operating instructions supplied with your computer.
Connecting to a Computer
Note
HD-Dsub15 pin cable (optional) or HDMI cable (optional)
: Video signal flow
Rear of the projector
to monitor output
Computer
When using an optional HDMI cable, be sure to use
a cable that has acquired an HDMI logo.