Cancel 24p mode (hdr-cx900e/fdr-ax100e), Calibration – Sony FDR-AX100 User Manual
Page 154
1.
- [Setup] - [
General Settings] - [24p Mode] -
.
If you want to return the system to 50i mode, select
in the [Cancel 24p Mode]
screen.
Note
This product reboots each time you change the setting.
When you change the setting, formatting the recording media is required.
When you select [24p Mode], the following settings will be limited.
The movie recording format is limited to AVCHD 24p (FX, FH), XAVC S HD 24p and XAVC S 4K
24p (FDR-AX100E).
Depending on the connected TV, images may not be played back normally because the video signal
output from this product is in the NTSC format.
You cannot set [
Frame Rate].
How to Use
Menu operations
Setup
Cancel 24p Mode (HDR-CX900E/FDR-AX100E)
Return the system to 50i mode by canceling 24p mode.
1.
- [Setup] - [
General Settings] - [Cancel 24p Mode] -
.
How to Use
Menu operations
Setup
Calibration
Use this function if the buttons on the touch panel does not work correctly.
1.
- [Setup] - [
General Settings] - [Calibration].
2. Touch “×” displayed on the LCD monitor with the corner of memory card or the like 3
times.
142