Audio settings – Sony BDP-S370 User Manual

Page 23

Advertising
background image

23

Set
tin

g

s and

Ad
ju

st

m

ent
s

Audio Settings

Audio (HDMI)

DSD Output Mode

BD Audio MIX Setting

Dolby Digital (Coaxial / Optical)

DTS (Coaxial / Optical)

DTS Neo:6

Audio DRC

Downmix

Auto

Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.

PCM

Outputs PCM signals from
the HDMI OUT jack.

On

Outputs DSD signals from
the HDMI OUT jack when
playing a Super Audio CD.
When “On” is selected, no
signal is output from other
jacks.

Off

Outputs PCM signals from
the HDMI OUT jack when
playing a Super Audio CD.

On

Outputs the audio obtained
by mixing the interactive
and secondary audio to the
primary audio.

Off

Outputs the primary audio
only. Select this to output
HD audio signals to an AV
amplifier (receiver).

Downmix
PCM

Converts to output Linear
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.

Dolby Digital

Select this when connecting
an audio device with a built-
in Dolby Digital decoder.

Downmix
PCM

Converts to output Linear
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.

DTS

Select this when connecting
to an audio device with a
built-in DTS decoder.

Cinema

Performs “DTS Neo:6
Cinema” mode decoding. A
source recorded in 2-channel
format is decoded into 7
channels.

Music

Performs “DTS Neo:6
Music” mode decoding. A
source recorded in 2-channel
format is decoded into 7
channels. This setting is
ideal for normal stereo
sources such as CDs.

Off

Turns off “DTS Neo:6”
decoding.

Auto

Performs playback at the
dynamic range specified by
the disc (BD-ROM only).
Other discs are played back
at the “Standard” level.

Standard

Performs playback at a
standard compression level.

Wide Range

No compression works. A
more dynamic sound is
produced.

Surround

Outputs audio signals with
surround effects. Select this
when connecting an audio
device that supports Dolby
Surround (Pro Logic) or
DTS Neo 6.

Stereo

Outputs audio signals
without surround effects.
Select this when connecting
an audio device that does not
support Dolby Surround
(Pro Logic) or DTS Neo 6.

Advertising
This manual is related to the following products: