Sony DCR-SX40 - Manual (Page 26)


US
When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
Other icons may appear.
No icon may appear depending on the
installation procedure.
The “Handycam Handbook” is not
installed in this procedure (p. 44).
To disconnect your camcorder from the
computer
 Click the icon at the bottom
right of the desktop of the
computer  [Safely remove USB
Mass Storage Device].
 Touch [END]  [YES] on the
camcorder screen.
 Disconnect the USB cable.



Creating a disc with
one touch
(One Touch Disc Burn)
You can save movies and photos on a disc
by simply pressing (DISC BURN)
on your camcorder. Movies and photos
recorded on your camcorder that have not
yet been saved with One Touch Disc Burn
can be saved on a disc automatically.
Install “PMB” beforehand (p. 24), however, do
not start “PMB.”
Connect your camcorder to the wall outlet (wall
socket) using the AC Adaptor supplied for this
operation (p. 13).
With (DISC BURN) on your camcorder,
you can save movies and photos recorded on
the internal memory only.
1
Turn on your computer, and place
an empty disc on the DVD drive.
See page 24 for the type of discs you can
use.
If any other software than “PMB” starts
automatically, shut it down.
2
Turn on your camcorder, and
connect it to the computer using
the USB cable (supplied).
3
Press (DISC BURN).




