Sony VPL-HS51 - Manual (Page 23)

23
Projecting the Picture on the Screen
Pr
o
ject
ing
This section describes how to operate the projector to view the picture from the
equipment connected to the projector. It also describes how to adjust the
quality of the picture to suit your taste.
Projecting the Picture on the Screen
1
Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I/ 1 (on/standby) switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
Refer to the operating instructions of the connected equipment.
Projecting
INPUT LIGHT
STANDARD CINEMA DYNAMIC
USER 2
PICTURE MODE
USER 3 USER 1
ENTER
Remote control detector
Zoom ring Focus ring
VPL-HS51
VPL-HS50
Remote control detector
Zoom ring
Focus ring
ON/
STANDBY
Lights in red.
ON/
STANDBY
Lights in green.