Sony HDR-SR5 - Manual (Page 13)

13
R
e
co
rd
in
g
/P
lay
ba
ck
Recording/Playback
Recording
1
Slide the POWER switch C until the respective lamp lights up.
Press the green button only when the POWER switch C is in the OFF (CHG) position.
• (Movie): To record movies
• (Still): To record still images
2
Start recording.
Press START/STOP A (or D).
To stop recording, press START/STOP A
(or D) again.
• You cannot record movies on a “Memory Stick
Duo.”
• See “Handycam Handbook” (PDF) for changing
the image quality to SD (standard definition)
image quality.
Press PHOTO E lightly to adjust the
focus A (a beep sounds), then press
it fully B (a shutter click sounds).
appears beside / . When
disappears, the image has been recorded.
• Still images are recorded on the hard disk in the
default setting.
b Notes
• If the ACCESS lamp is lit or flashing after recording is finished, it means data is still being written onto
the hard disk or “Memory Stick Duo.” Do not apply shock or vibration to your camcorder, and do not
remove the battery or AC Adaptor.
START/STOP A
Flashing t Lights up
POWER switch C
START/STOP D
[STBY] t [REC]
EASY F
PHOTO
E
(HOME) B
(p. 22)
Movies Still Images