Sony DCR-TRV250 - Manual (Page 47)

47
Playback
–
Basics
Playing back a tape
To display the screen indicators – Display function
Press DISPLAY on the Remote Commander.
Press DISPLAY on your camcorder.
The indicators appear on the screen.
To make the indicators disappear, press DISPLAY again.
About data code
Use the Remote Commander for this operation.
Your camcorder automatically records not only pictures on the tape but also the data
code (date/time or various settings when recorded).
1 Set the POWER switch to VCR, then play back a tape.
2 Press DATA CODE on the Remote Commander.
The display changes as follows:
date/time
t various settings t no indicator
[a]: Time code/Tape counter
[b]: SteadyShot off
[c]: Exposure mode
[d]: White balance
[e]: Gain
[f]: Shutter speed
[g]: Aperture value
DISPLAY
DISPLAY
DATA CODE
Date/time
JUL 4 2003
12:05:56 PM
50
min 0:00:23:01
[a]
[b]
[c]
[d]
[e]
[f]
[g]
Various settings
60 AWB
F1.6 9dB
AUTO
0:00:23:01 50 min