Sony PEG-TJ27 - Manual (Page 86)

Customizing your CLIÉ™ handheld (Preferences) 86
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 A-BTG-100-11 (1)
Setting the Network preferences for a wireless LAN (for PEG-TJ37 only)
Connecting your CLIÉ handheld to a wireless LAN access point
automatically
You can enable the Auto Connect function at the setting of more than one
wireless LAN access point. In this case, the most suitable wireless LAN access
point is selected.
Tip
To connect your CLIÉ handheld to a wireless LAN access point automatically, enable
the Auto Connect function (refer to P.83) by tapping s (check box) next to [Auto
Connect:] at the setting of wireless LAN access point. When the Auto Connect function
is enabled for a wireless LAN access point, “*” is indicated at the left side of the SSID
of the wireless LAN access point on the
Wireless LAN setup screen.
1
Tap V at the top right corner of the Preferences screen, and
select [Network].
2
Tap [ V Service:], and select [Wireless LAN].
3
Tap [Details...].
The Wireless LAN Setup screen is displayed.
4
Tap [-Auto Connect-] under [Profile Name:].
5
Tap [OK].
The Wireless LAN Setup screen is closed and the Preferences screen
for [Network] is displayed.
01US01COV.book Page 86 Wednesday, December 3, 2003 10:02 AM