APC AP7003 - Manual (Page 20)

16
Maintaining the Unit continued
Storing the Unit The following precautions must be taken when storing the unit
for extended periods of time:
1. Turn off unit.
2. Clean the air filter and allow to air dry before replacing in
unit.
3. Empty the condensate tank.
4. Remove the stopper from the water drain pipe and drain
until empty. Reinsert the water drain pipe into the unit.
5. Replace the tank.
6. Turn the unit on and allow the fan to run three minutes after
emptying the tank to dry out the moisture in the evaporator
coil.
7. Turn power off. Power cable must be disconnected from
power outlet and neatly rolled.
8. Store the unit in a dry place.
Water Drain
Pipe
Stopper