Installation, Warnings, Set up the unit – APC AP7003 User Manual

Page 9: Warnings 5, Set up the unit 5

Advertising
background image

5

Installation

Warnings

Use the unit on a flat surface where the air outlets are
unobstructed.

Do not place the unit less that 20 inches (50 cm) away from
any wall or obstacle.

Do not install this air conditioner where there are fumes or
flammable gases, or in an extremely humid space such as a
green house.

Set up the unit

1. Unpack the unit and the accessory kit. Slip the bands off

the unit—do not cut the bands.

2. Inspect the unit and the accessories for damage.

Caution: If you find shipping damage, do not operate the

unit. If you have shipping damage, keep all
packaging for inspection by the shipper and call
APC Customer Support at a number listed on the
back cover of this manual.

Note:

This unit should not be placed on its side. If it does
get tipped, place the unit upright on a flat, solid
surface and keep it in this position for a minimum
of two hours before operating.

20 in

)

(50 cm

20 in

)

(50 cm

Advertising
This manual is related to the following products: