Sony DCR-SR220 - Manual (Page 19)

Getting Started
19
Step 4: Making setting adjustments before recording
Adjusting the LCD panel
Open the LCD panel 90 degrees to the
camcorder (), then rotate it to the best
angle to record or play ().
To turn off the LCD backlight to make the
battery last longer
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use
your camcorder in bright conditions or
when you want to save battery power. The
recorded image will not be affected by the
setting. To turn on the LCD backlight,
press and hold DISP/BATT INFO for a few
seconds until disappears.
Notes

Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
Tips

If you rotate the LCD panel 180 degrees, you
can close the LCD panel with the LCD screen
facing out. This is convenient during playback
operations.

Touch (HOME)  (SETTINGS) 
[SOUND/DISP SET]  [LCD BRIGHT]
(p. 66), and adjust the brightness of the LCD
screen.

The information is displayed or hidden (display
 no display) each time you press DISP/
BATT INFO.


Fastening the grip belt
Fasten the grip belt and hold your
camcorder correctly.
90 degrees
(max.)
DISP/BATT INFO
180 degrees
(max.)
90 degrees to the
camcorder