Sony bloggie MHS-PM1 - Manual (Page 54)

54
MHS-PM1
4-135-530-11(1)
J:\ichihashi\works\cx20300\PDF\4135530111MHSPM1\080SET.fm
master:Left
For details on the operation 1 page 48 Setup 2
2
The default settings are marked with .
Selects the method used to assign file numbers to images.
Selects the USB mode to be used when connecting the camera to a computer using the USB
cable.
Connecting the camera and your computer with Mass Storage
“Mass Storage” mode lets a computer recognize the camera with “Memory Stick PRO Duo” media inserted
as an external memory device and enables you to operate the camera through the computer connected with a
USB cable.
File Number
Series Assigns numbers to files in sequence even if the recording
folder or the “Memory Stick PRO Duo” media is changed.
(When the replaced “Memory Stick PRO Duo” media
contains a file with a number higher than the last assigned
number, a number one higher than the largest number is
assigned.)
Reset Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
USB Connect
Web camera Connect the camera and a computer with a USB cable and use
the camera as a webcam (USB streaming).
• Movies output will be QVGA 30P Motion JPEG format.
• Movies streamed will be also displayed on the LCD screen of
the camera.
Mass Storage Establishes a Mass Storage connection between the camera
and a computer or other USB device.