Sony bloggie MHS-PM1 - Manual (Page 57)

57
MHS-PM1
4-135-530-11(1)
J:\ichihashi\works\cx20300\PDF\4135530111MHSPM1\080SET.fm
master:Right
Cu
st
omi
zin
g t
h
e s
et
tin
gs
Setup 2 For details on the operation 1 page 48
Sets the video signal output according to the TV color system of the connected video
equipment. Different countries and regions use different TV color systems. If you want to
view images on a TV screen, check page 59 for the TV color system of the country or region
where the camera is used.
Sets the date and time.
1 Select [Clock Set] with the multi-selector tilt to v/V/b/B, then tilt to B.
2 Select [OK] with v, then press the multi-selector.
3 Select the date display format with v/V, then press the multi-selector.
4 Select each item with b/B and set the numeric value with v/V.
5 Select [OK] with B, then press the multi-selector.
To cancel the clock setting
Select [Cancel] in step 5, then press the multi-selector.
Video Out
NTSC Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL Sets the video output signal to PAL mode (e.g., for Europe).
Clock Set
/ : /