Clearing area a (with duplex module), Clearing area a (with duplex module) -16 – Xerox N3225 User Manual
Page 130
Advertising

Paper Jams
5-16 ❖ User Guide
Clearing Area A (With
Duplex Module)
Follow the procedure below to clear a paper jam from
Area A when the Control Panel display reads
C l e a r
A r e a A
and
there is a Duplex Module installed on the
printer.
1
Remove any paper from the Face-up Tray, then open the
Duplex Module.
2
Open Door A.
3
Remove any jammed paper.
A
If the leading edge of the paper is already in the
Face-down Bin, gently pull out the paper until it is
completely removed.
Advertising
This manual is related to the following products: