Minka Group F510-WH - Manual (Page 16)

9
Fig. 11
INSTALLING THE LIGHT KIT MOUNTING PLATE
Step 1. Remove 1 of 3 screws from the mounting ring and loosen the other 2 screws. (Do not
remove)
Step 2. Place the key holes from the light kit Mounting Plate mounting plate over the 2 screws
previously loosened from the mounting ring, turn light kit mounting plate until it locks in place at
the narrow section of the key holes. Secure by tightening the 2 screws previously loosened and the
one previously removed. (Fig. 11)
LIGHT KIT
MOUNTING
PLATE
SCREWS
MOUNTING RING