Ultra Start 3295 - Manual (Page 17)

PAGE 16 95 SERIES
OWNERS MANUAL
PROGRAM FEATURES
UL
TRA
P 12:35
PROGRAM
TO ENTER TIMER SET MODE
PRESS AND HOLD THE START (KEY) AND STATUS BUTTONS ON THE REMOTE FOR
4 SECONDS. THE REMOTE WILL BEEP 1 TIME THEN THE PROGRAM AND CLOCK
ICONS TURN ON.
PRESS THE LOCK BUTTON TO CHANGE FROM HH TO MM
PRESS THE UNLOCK BUTTON TO INCREASE THE SETTING
PRESS THE LOCK BUTTON TO DECREASE THE SETTING
FEATURES SUCH AS TIMER SET, CLOCK SET AND TEMPERATURE MODE ARE SET BY
HOLDING MULTIPLE BUTTONS TO ADUST.
TIMER SET MODE
TIMER SET MODE ALLOWS THE USER TO PROGRAM THE
REMOTE STARTER TO START AT A PRESET TIME OF THE
DAY. ONCE THE TIME IS SET THE “TIMER ON” FUNCTION
MUST BE ENABLED THROUGH THE REMOTE
PROGRAMMING MENU.
UL
TRA
P 12:35
PROGRAM
TO SET THE CLOCK TIME
PRESS AND HOLD THE LOCK AND STATUS
PRESS THE LOCK BUTTON TO CHANGE FROM HH TO MM
PRESS THE UNLOCK BUTTON TO INCREASE THE SETTING
PRESS THE START BUTTON TO DECREASE THE SETTING
PRESS AND RELEASE THE STATUS BUTTON TO EXIT.
BUTTONS ON
THE REMOTE FOR 4 SECONDS. THE REMOTE WILL BEEP 1
TIME THEN THE PROGRAM AND CLOCK ICONS TURN ON.
CLOCK SET MODE
+
+
PROGRAMMING
PAGE 17 95 SERIES
OWNERS MANUAL
SHOCK SENSOR PROGRAMMING
PRESS AND RELEASE THE UNLOCK BUTTON TO
DECREASE THE SENSITIVITY. THE LCD WILL SHOW
THE CURRENT SETTING. THE LOWEST (LEAST
SENSITIVE SETTING IS SEN 1.
THE SHOCK SENSOR SENSITIVITY IS SET USING THE REMOTE PROGRAM MODE
FEATURE. ALARM MODELS ONLY.
PRESS AND RELEASE THE START BUTTON TO
INCREASE THE SENSITIVITY. THE LCD WILL SHOW
THE CURRENT SETTING. THE HIGHEST (MOST
SENSITIVE) SETTING IS SEN 10.
PRESS AND RELEASE THE STATUS BUTTON ON THE REMOTE TO EXIT.
ENTER REMOTE PROGRAM MODE
ADJUSTING THE SENSOR SENSITIVITY
EXIT PROGRAM MODE
UL
TRA
UL
TRA
UL
TRA
SEN 3
OFF
SEN 7
SEN 5
OFF
OFF
1
1
1
UL
TRA
M-1234
PROGRAM
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 1 TIME AND THEN 3 TIMES.
THE DISPLAY WILL SHOW “PROGRAM” & “M-1234"
ENTER SHOCK SENSITIVITY PROGRAMMING
PRESS AND RELEASE THE UNLOCK BUTTON
THE SENS LEVEL WILL BE DISPLAYED
PROGRAMMING