Ultra Start 3295 - Manual (Page 20)

PAGE 20 95 SERIES
OWNERS MANUAL PROGRAMMING
RUN TIME ADJUSTMENT
UL
TRA
M-1234
PROGRAM
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
“PROGRAM” & “M-1234". PRESS START TO CONTINUE.
RUN TIME ADJUSTMENT
PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PRESS START BUTTON TO CHANGE TO 45 MINUTES.
PRESS STATUS TO EXIT.
PRESS START TO GO TO RUN TIME ADJUSTMENT
TEMP START ADJUSTMENT
UL
TRA
M-1234
PROGRAM
UL
TRA
TIMER
PROGRAM
ON
TO ENTER PROGRAM MODE
PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY
“PROGRAM” & “M-1234". PRESS TRUNK TO CONTINUE.
TEMP ADJUSTMENT
PRESS THE UNLOCK OR START BUTTONS TO SCROLL
THROUGH THE SETTINGS.
TEMP 1- THE SYSTEM WILL START AT 0C / 32F
TEMP 2-
TEMP 3-
TEMP 4-
THE SYSTEM WILL START AT -5C / 23F
THE SYSTEM WILL START AT -15C / 5F
THE SYSTEM WILL START AT -25C / 13F
UL
TRA
TEMP 1
PROGRAM
ON
PRESS TRUNK TO GO TO TEMP ADJUSTMENT
UL
TRA
TIMER
PROGRAM
ON
UL
TRA
RUN 15
PROGRAM
ON
*TEMP MODE IS TURNED ON OR OFF BY HOLDING THE LOCK AND START BUTTONS FOR 5 SECONDS.
THE TEMP SENSOR MUST BE INSTALLED FOR THIS FEATURE TO OPERATE.
PAGE 21 95 SERIES
OWNERS MANUAL
THIS FEATURE IS USED TO DEACTIVATE THE REMOTE START AND ALARM (ALARM
MODELS ONLY) IF THE VEHICLE REQUIRES SERVICING OR IF THE REMOTE IS LOST OR
DAMAGED WHILE THE ALARM IS IN ARMED STATE.
ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON
POSITION.
(LEAVE IN THE ON POSITION)
WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15
SECONDS*
*DEPENDS ON “VALET OPTIONS” PROGRAM OPTION.
ACTIVATING VALET MODE/ EMERGENCY OVERRIDE.
THE HORN WILL CHIRP 5 TIMES AS CONFIRMATION THAT THE
SYSTEM HAS ENTERED VALET/ EMERGENCY OVERRIDE MODE.
THE LCD WILL DISPLAY VALET AFTER A FUNCTION IS PREFORMED.
THE LEDS ON THE ANTENNA WILL TURN ON SOLID.
ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON
POSITION.
(LEAVE IN THE ON POSITION)
WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15
SECONDS*
*DEPENDS ON “VALET OPTIONS” PROGRAM OPTION.
THE HORN WILL CHIRP 2 TIMES AS CONFIRMATION THAT THE
SYSTEM HAS EXITED VALET/
OVERRIDE MODE. EMERGENCY
THE LEDS ON THE ANTENNA WILL TURN OFF.
VALET / EMERGENCY OVERRIDE MODE
PROGRAMMING