Ultra Start 3295 - Manual (Page 7)

STOP
START
1
1
1 BEEP
PAUSE
1 BEEP
1 BEEP
PAUSE
TONE
ACTIVATES THE REMOTE CAR STARTER FUNCTION.
THE DEFAULT RUNTIME IS 15 MINUTES.
TURNS OFF THE REMOTE CAR STARTER.
THE SYSTEM WILL AUTOMATICALLY TURN OFF AFTER THE DEFAULT RUNTIME
(15 MINUTES) HAS EXPIRED.
KEY- PRESS AND HOLD
WHILE VEHICLE IS RUNNING
KEY- PRESS AND HOLD FOR
3 SECONDS TILL REMOTE BEEPS
THEN RELEASE
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
EX RUN
1
1 BEEP
PAUSE
TONE
1 BEEP
PAUSE
TONE
RESETS THE RUN TIME.
THIS FEATURE WILL EXTEND THE CURRENT RUNTIME WHILE THE SYSTEM IS
RUNNING BY THE REMOTE START.
KEY- PRESS & RELEASE
WHILE RUNNING BY STARTER
IDLE
1
ACTIVATES THE IDLE MODE FEATURE.
THE VEHICLE WILL RUN FOR 15 MINUTES WHEN THE KEY IS REMOVED.
KEY- PRESS & RELEASE
WHILE RUNNING BY KEY
TURBO
1
2 BEEPS ACTIVATES THE TURBO TIMER MODE FEATURE.
THE VEHICLE WILL RUN FOR 2 MINUTES WHEN THE KEY IS REMOVED.
PRESS & RELEASE
WHILE RUNNING BY KEY STATUS
(BUTTON 5)
M-1234
1
MELODY ENTERS REMOTE PROGRAM MODE.
SEE REMOTE PROGRAM MODE SECTION OF THE MANUAL FOR MORE DETAILS.
*REMOTE PROGRAM MODE ALLOWS THE USER TO SET OR CHANGE DEFAULT FEATURES OF
THE SYSTEM SUCH AS TIMER MODE, PAGER MODE, VALET MODE. SEE REMOTE PROGRAM MODE
FOR MORE PROGRAMMABLE OPTIONS.
PRESS & HOLD STATUS
(BUTTON 5)
STATUS
(BUTTON 5)
PAGE 7 95 SERIES
OWNERS MANUAL
IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED. THE START FAULT
WILL CLEAR THE NEXT TIME THE SYSTEM IS LOCKED OR UNLOCKED. PLEASE SEE FAULT CODE
SECTION OF MANUAL FOR MORE INFORMATION.
QUICK VIEW CHART
AUX 2
AUX 1
1
1
1 BEEP
PAUSE
TONE
1 BEEP
PAUSE
TONE
ACTIVATES THE AUXILIARY #1 OUTPUT.
THE OUTPUT WILL STAY ACTIVE FOR 4 SECONDS.
ACTIVATES THE AUXILIARY #2 OUTPUT.
THE OUTPUT WILL STAY ACTIVE FOR 4 SECONDS
DISARM
12:25PM
1
1
PRESS AND RELEASE 1 BEEP
PAUSE
1 BEEP
DISPLAY BUTTON PRESS AUDIBLE FUNCTION
UNLOCK
LOCK
1
1
IF THE DOORS ARE UNLOCKED/ SYSTEM DISARMED * THE DOORS
WILL LOCK WITH NO CHIRPS. IF THE DOORS ARE LOCKED/ SYSTEM
ARMED* THE DOORS WILL UNLOCK WITH NO CHIRPS.
*ALARM MODELS ONLY.
PRESS AND RELEASE THE
LOCK AND UNLOCK BUTTONS
AT THE SAME TIME.
PRESS AND HOLD THE
UNLOCK AND TRUNK
BUTTONS FOR 5 SECONDS
PAGE 6 95 SERIES
OWNERS MANUAL
KEY- PRESS AND RELEASE
LOCK- PRESS AND RELEASE SHOCK SENSOR BYPASS
THE SHOCK SENSOR WILL BE DISABLED UNTIL THE NEXT TIME THAT
THE SYSTEM IS DISARMED THEN REARMED
*ALARM MODELS ONLY
STATUS UPDATE
THIS FEATURE DISPLAYS THE CURRENT STATUS OF THE SYSTEM, THE
TEMPERATURE THEN THE TIME.
* IF NO TEMP SENSOR IS INSTALLED OR IF THE SENSOR HAS AN ERROR
THE TEMP DISPLAYED WILL BE -121 C.
1 BEEP
PAUSE
TONE
WITHIN 3 SECONDS
LOCK
1
SENOFF
1
THE AUXILIARY OUTPUTS ARE USED TO ACTIVATE ADDITIONAL FUNCTIONS SUCH AS WINDOW
ROLL-UP AND GAS CAP RELEASE. THESE FUNCTIONS MAY REQUIRE ADDITIONAL PARTS AND
LABOUR. SEE DEALER FOR MORE INFORMATION.
QUICK VIEW CHART
NOTE: THIS FEATURE MUST BE SET BY INSTALLER - REFER TO INSTALL GUIDE
1 BEEP
PAUSE
1 BEEP
1 BEEP
PAUSE
2 BEEPS
OR
PRESS AND HOLD THE
UNLOCK AND STATUS
BUTTONS FOR 5 SECONDS