AT&T Generic 1 - Manual (Page 19)

To end a call 1 Hang up handset
or
if you are using the speakerphone,
press
[ Spkr ]
●
Red light next to [ Spkr ] goes off
Auto Answer (for 8110 Users) ■
Note: If you are using the 8110 telephone with a DEFINITY Generic 1 system, the
line must be assigned as “Data Restricted” in order for the Auto Answer feature to
work properly on your telephone. Contact your system manager to have the “Data
Restricted” feature assigned to your line.
To use the Auto Answer 1 While handset is on-hook, press [ Auto ]
feature so your telephone
●
Button released to the “up” position
automatically answers
incoming calls
● Colored area under button will remind you that
the Auto Answer feature is active
2 When a call comes in, the built-in speakerphone on
your telephone is automatically activated
● Both you and the other party hear a full ring and
then a short burst of tone
● Red light next to [ Spkr ] goes on
3 Speak to caller
4 When caller ends the call, 8110 telephone hangs up
automatically
or
You can press [ Spkr ] to end call
●
The 8110 telephone is now ready for next
Auto Answer call
14