AT&T Generic 1 - Manual (Page 24)

For example, to put a pause between the dialing
access number, 9, and the telephone number,
press the PAUSE button, then 12125551234 .)
Several depressions of the PAUSE button will
produce a multiple of a .5-second pause. (Three
depressions of the PAUSE button would equal 1.5
seconds.)
●
Programmable dialing buttons can also be used to
program system features. See your system
manager for system feature codes.
4 To program another programmable dialing button,
repeat Steps 2 and 3
5
Press the PROGRAM button when you are ready to
exit programming mode
To dial a number with a 1
programmable dialing
button
2
Pick up handset
or
if you are using an 8110 telephone,
you can press [ Spkr ]
When you hear a dial tone, press the appropriate
programmable dialing button
●
Number programmed on the button is
automatically dialed
To erase a number stored
1 Press the PROGRAM button
on a programmable 2
Press button to be cleared twice
dialing button
3 Press the PROGRAM button
or
lift handset
Redial
■
To automatically redial
1 Pick up handset
the last number you
or
dialed (from the dial pad)
if you are using an 8110 telephone, you can
press
[ Spkr ]
[dial tone]
2 Press [ Redial ]
●
Number is automatically redialed
Note: You will hear a rapid error tone if the
dialed number is longer than 20 elements.
19